Arrow Build

Ask other modelers for a little help / knowledge ?

Postby ADW 123 » Tue Apr 05, 2011 4:31 pm

around the spinner that might be a problem.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Tue Apr 05, 2011 5:27 pm

9.3 gs for the spinner cut out, exaust cowlings, and prop shaft/prop assembally.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Tue Apr 05, 2011 7:25 pm

some progress. i got the plastic bits painted

Image

Image

the prop all set up

Image

weight for spinner and prop assem.


Image

so now we are loking at a total weight of 46g includeing rubber[/img]
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Fri Apr 08, 2011 8:56 pm

i was in the car getting ready to go to the fields so i could trim/test fly my plane, and then someone put a purse down and actually acidentaly broke my wing (pretty much in half). work to repair/restore the wing to it's former glory begins emediatly.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby al » Fri Apr 08, 2011 9:24 pm

ADW 123 wrote:i was in the car getting ready to go to the fields so i could trim/test fly my plane, and then someone put a purse down and actually acidentaly broke my wing (pretty much in half). work to repair/restore the wing to it's former glory begins emediatly.


Oh No! The dreaded Purse! Sorry to hear about that.
al
 
Posts: 19
Joined: Mon Apr 04, 2011 11:28 pm

Postby BillParker » Fri Apr 08, 2011 9:42 pm

some one?

no!

Don't say it!

Someone named.... MOM?
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas

Postby ADW 123 » Fri Apr 08, 2011 10:01 pm

someone named... Aunt... Mr. Parker.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Fri Apr 08, 2011 10:17 pm

alright. so here is the repair process. (lots of fun i know)

the method i used on this for covering is very useful in this sense. it is very easy to remove tissue, as there isnt very much glue holding it down. so cutting this off was a snap.

Image

an idea of the damage i was dealing with

Image

here, i removed the F2 rib that was the most severely damaged.

Image

here, a stringer has been replaced. i did not remove all the stingers, because i didnt want to make so much work for myself, and i thought that the frame was already fragile enuff. since the joints would be a little weak otherwise, i added some extra glue there.

Image


Image

the forward stringer (at least part of it) replaced

Image

unforchunatly, i do not have anymore of this yellow tissue. i have some xeon yello tissue that i will use instead. wont stop this thing from flying...
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Apr 09, 2011 12:17 pm

aint that pretty??

Image

Image

finished article ready for shrinking:

Image


shrunk and with 2 coats of bannana oil:

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby Phugoid » Sat Apr 09, 2011 1:46 pm

I hope that your Aunt has given you a few Pennies towards a new kit....

My sympathy!
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Postby ADW 123 » Sat Apr 09, 2011 1:52 pm

nah. im needed something to do. waiting on my next project.

it will fly again!

found my 1/4" rubber. dont think i can use it on this plane though. the hole in the front for the thrust button which i wish to use is too small for it really. so ive been messing around with 2 loops of 3/32" rubber. it actually does alright, and i can get in more than 1,300 winds on it. ill get some more 1/8" rubber when i get the chance.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby supercruiser » Sat Apr 09, 2011 2:14 pm

I did something similar to my Guillow Fairchild. NO! Not drop a purse on it.
A battery charger slid off my bookshelf and landed on the fuselage, the same afternoon that I completed the model.

A suggestion on repairs. Cutting the stringers and gluing the butt ends together is certainly o.k. For a stronger joint you can use a scarf joint.
supercruiser
 
Posts: 405
Joined: Wed Jun 15, 2005 8:47 am

Postby Squishyp38 » Sat Apr 09, 2011 2:28 pm

And what is a scarf joint?
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
 
Posts: 240
Joined: Sun Feb 27, 2011 8:08 pm
Location: Top Secret

Postby ADW 123 » Sat Apr 09, 2011 2:54 pm

supercruiser, i think i mentioned i did add more glue than usual to these butt joints, to make them stronger. now, it actually seems it is as strong if not stronger as before.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby supercruiser » Sat Apr 09, 2011 7:27 pm

Squishyp38 wrote:And what is a scarf joint?


A scarf joint is when the two pieces of wood are joined by making an inclined
ramp at the end of each piece of wood. These two ramps face each other and are glued. I tried to find a picture on the internet but, they are fancy scarf joints with notched ends or pegs inserted. The angle gives more contact area for the glue, instead of just putting the two ends together.

Here is an attempt at a pictorial of the joint:
]/ /[

It really hard to explain but a very simple concept. You should use a fixture to hold the balsa to make consistent cuts. Try a google search.
supercruiser
 
Posts: 405
Joined: Wed Jun 15, 2005 8:47 am

PreviousNext

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 37 guests