Cessna 150 Build and new Fuselage jig review

Ask other modelers for a little help / knowledge ?

Postby scigs30 » Fri Jul 24, 2009 8:01 am

Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby scigs30 » Sat Jul 25, 2009 9:44 pm

I think I am all done with the Cessna. I decided to keep it simple and leave it white. When I was a small kid I used to go to the local family owned hobby store and look at the Guillows Cessna hanging from the ceiling. So I wanted my Cessna to resemble that one.
After I covered all the structures I brushed 2 coats of 50/50 dope thinner to protect the tissue. Then assembled everything with Elmer's Glue. The pattern for the windshields needed a little trimming, but other wise right on. I glued the windshield on with med. CA. I think the clear windshields make this kit. I beefed up the plastic cowl with balsa and painted it so that added enough weight to balance the plane. The test glide was perfect with no clay needed. The way I trim the plane is I test glide it without the rubber. I add clay as needed. Now when I fly the plane all the rest of the adjustments are made with nose thrust. The final weight is 31 grams minus the rubber. I will take her out flying tomorrow. Sorry about the smudge on the pictures, we took the camera in this afternoon for repair. I will update the flight report.
Image
Image
Image
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby scigs30 » Tue Jul 28, 2009 12:23 am

I have all my planes ready and will take them out flying tomorrow am. I will post a report and pictures when I get home.
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby Anders » Tue Jul 28, 2009 7:03 am

nice cessna! :)
again the wood work is good :)
the spitfire and fw190 was the nicest i think, i like warbirds 8)
Anders
 
Posts: 19
Joined: Fri Jul 10, 2009 7:22 am
Location: Norway

Postby scigs30 » Tue Jul 28, 2009 11:42 am

Here are some pictures of my adventures this am. I was not able to fly all my planes since they kicked me off the soccer field. The Cessna flew great with 3/16 rubber.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby scigs30 » Tue Jul 28, 2009 11:52 am

Here is the Guillows Cub and Comet Cub, both great fliers.
Image
Image
Image
Image
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby scigs30 » Tue Jul 28, 2009 11:55 am

Here is the FW190 and Hellcat, both great flyers.
Image
Image
Image
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby flash52 » Tue Jul 28, 2009 3:48 pm

Excellent flight pictures. The models fly as good as they look. Which Cub flies the best?
flash52
 
Posts: 67
Joined: Tue Mar 10, 2009 5:31 pm
Location: Wichita,KS

Postby scigs30 » Tue Jul 28, 2009 3:52 pm

The Comet by far. The Comet kit will fly away if you are not careful
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby flash52 » Wed Jul 29, 2009 8:53 am

I know I'm nitpicking but you have aroused my curiosity. Why are the star and bars upside down and the no.4 reversed on the right side of the F6F. Just curious. The pictures of the Hellcat trucking along makes me want to drop everything and start one. Did you lighten it up any?
flash52
 
Posts: 67
Joined: Tue Mar 10, 2009 5:31 pm
Location: Wichita,KS

Postby scigs30 » Wed Jul 29, 2009 10:14 am

This is an old model and the decals keep falling off so I just stick them back on, that is why they are upside down, oops. This is a complete modified Guillows kit weighing in at 14 to 16 grams with everything. I am going to build another but I will not modify other than using quality balsa. This is a great design and if all you do is use better wood, it will fly great.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby BeeCee » Fri Jul 31, 2009 10:30 am

Outstanding craftsmanship and excellent flight pics!
I have followed your builds with great interest and have learned
that I have a long way to go with my modeling skills.
I noticed a small "flap" under each left wing-tip in your flying
pictures, but not on the build pictures. Probably for flight trim.
Could you enlighten a struggling old-timer who's trying to
get back into it? Thanks.

Bob
BeeCee
 
Posts: 7
Joined: Wed Jul 29, 2009 3:33 pm
Location: Massachusetts

Postby Anders » Fri Jul 31, 2009 12:26 pm

I think the "flap" is there to make the models fly in a left turn :roll:
Anders
 
Posts: 19
Joined: Fri Jul 10, 2009 7:22 am
Location: Norway

Previous

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 20 guests