Kit# 203 Nieuport 11 Build

Ask other modelers for a little help / knowledge ?

Kit# 203 Nieuport 11 Build

Postby Arlo DiPasquale » Sun Sep 25, 2011 11:15 am

Thank God for the weekend!! I was just able to finish up the fuselage on my Nieuport 11.
Image
Now I can watch the Bills game!! :D
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby cliffm » Sun Sep 25, 2011 4:43 pm

This kit went together so nice it was hard to put down even for a football game, it was my first laser cut and I was amazed at how everything fit so precisely. Have fun.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Arlo DiPasquale » Sun Sep 25, 2011 5:31 pm

the one I am building is an older one which means it is actually die cut. Even so, it has all it together perfectly with no tweaking. On top of that, the Bills won!!
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby cliffm » Sun Sep 25, 2011 9:56 pm

Yes, and I could'nt be happier about who they beat!!!
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Arlo DiPasquale » Thu Sep 29, 2011 8:03 pm

I was able to finish up the frames for my Nieuport 11 this afternoon. Can't wait to start covering it!! :mrgreen:
Image
Image
Sorry for the Dumas plane in the background :oops:
Image
Working on this helped distract me from the sad fact that the Red Sox did not make the playoffs... :( . I will post more pictures as the model progresses!
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby Arlo DiPasquale » Thu Sep 29, 2011 9:05 pm

I will add that any constructive comments are welcomed since many of you have been doing this much longer than I have, and one of the best ways to learn is to have people that are more experienced than you point out what you need to do better. I am my own worst critic, so don't worry about hurting my feelings!! :wink:
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby cliffm » Thu Sep 29, 2011 9:20 pm

I found when I was at this stage it was convenient to stain and varnish the landing gear and wing struts for a little added " bright work",( a phrase used by boat people for all their varniImageshed wood).
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby Phugoid » Fri Sep 30, 2011 7:54 am

Looks great to me Arlo...
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Postby scigs30 » Fri Sep 30, 2011 8:55 am

I wouldn't call it constructive criticism, but if you want to fly her on rubber make the nose come off. Mine needed a lot of clay and rubber to get a nice flight and there is no way I could have squeezed the rubber through the small nose buttonhole. Your build looks good, the Nieuport is a nice looking bird and flies great. Also Guillows recommends adding wire to the landing gear struts, great idea and the front can use the added weight.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby Arlo DiPasquale » Fri Sep 30, 2011 6:33 pm

Thank you scigs for the nose block advise, I saw how you did it on your Nieuport. I am not sure this one will fly since the wood is very heavy. I am just wondering, as a general rule, how heavy the plane should be in order for it to be flown. I do not fly many of my planes, and many of the ones I fly are smaller, so I am somewhat illiterate in this area.
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby scigs30 » Fri Sep 30, 2011 9:05 pm

Mine came with pretty heavy laser cut wood, but I contacted guillows and they sent out some awesome balsa so that helped. For me I try to fly everything no matter how heavy. Of course heavy models are harder to trim and land or crash harder but still they can be fun to fly........
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby Arlo DiPasquale » Tue Oct 04, 2011 7:02 pm

Finished covering the fuselage and tail surfaces (empennage to be fancy) last night. The wings are taking much longer because the metallic silver Esaki tissue I am using is a time consuming, pain in the butt to apply. If anybody has any suggestions on applying it, I would really appreciate it. Anyways, here is a pic of the fuselage. Still have to spray it and add the cockpit paper pattern.
Image
It is my best imitation of Scigs' Nieuport, hope I do it justice.
Arlo DiPasquale
 
Posts: 207
Joined: Tue Jun 10, 2008 9:22 am
Location: Minneapolis, MN

Postby scigs30 » Wed Oct 05, 2011 9:15 pm

Looks good to me.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby BillParker » Wed Oct 12, 2011 9:59 pm

Image
William H. Parker Jr. (Bill Parker)
President, Parker Information Resources
http://www.parkerinfo.com/ap.htm bparker@parkerinfo.com
BillParker
 
Posts: 1031
Joined: Sat Jan 19, 2008 1:21 pm
Location: Houston, Texas


Return to General Building Questions

Who is online

Users browsing this forum: Bing [Bot] and 28 guests