Nieuport II Build

Ask other modelers for a little help / knowledge ?

Postby ADW 123 » Sun Jun 19, 2011 4:19 pm

Jensheydel, i like yours better. sorry squish.. he outgunned you.

this is where i have posted my design since it isnt really guillows. i used guillows three views but.. dont think that counts, so i dont post them here.

ill take you to the third page of my thread because that is where my most recent post is, but i would encourage anyone to go back in it. you can see the 3D models of my fuselage i made. now, i was just learning this program, so the first ones are not as good as the most recent ones.

here is the link-

http://www.smallflyingartsforum.com/YaBB.pl?num=1305892793/30#30
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby scigs30 » Mon Jun 20, 2011 9:13 am

Who needs laser cutting? I could not use the kit wood because of age, so I scanned the wood and traced in Coreldraw, then cut it out. Comet used 5/64 balsa for this kit and in a lot their older kits, well I have not ideal where to buy that so there are a couple of options. 5/64 is in between 1/16 and 3/32 inch so using one of those two would work with 1/16 being the best choice. For me I wanted to keep it close to original as possible so I make 5/64 from 3/32 sheet by putting the wood between 2 5/64 dia. music wire and sanding the thickness. This is a fast and easy build and should be done before my covering comes in for the Guillows Nieuport.
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby jensheydel » Mon Jun 20, 2011 10:23 am

THAT was HANDCUT???? :shock: you are a better man than I am that is for sure!! Nice work!!

Cheers, Jens
jensheydel
 
Posts: 73
Joined: Mon Jun 06, 2011 7:57 am

Postby Supercubber95 » Mon Jun 20, 2011 11:24 am

Sir, you could have hurt yourself trying to do that good of a job! WOW!!! How big of a wingspan does that little sucker have? It looks tiny.
Supercubber95
 
Posts: 218
Joined: Wed Apr 21, 2010 2:13 pm
Location: Belle Fourche, South Dakota

Postby Squishyp38 » Mon Jun 20, 2011 1:07 pm

It looks............. cute.

I WANT ONE!
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
 
Posts: 240
Joined: Sun Feb 27, 2011 8:08 pm
Location: Top Secret

Postby scigs30 » Mon Jun 20, 2011 3:02 pm

She is about 13 1/4", but by the time I finished sanding and shaping the wing tips, she is at 13 inches, just big enough for peanut scale. I built this little bird when I was a kid and she flew pretty good. Typical Comet plans, leaves a little building up to the imagination, like the landing gear. I remember mine broke off on the first landing and the rest of the flights she was flew were without gear. This time I am making wired landing gear, and moved the motor peg up for easy rubber installation. I will have to take a picture of the bones of all 3 Nieuports next to each other before covering them.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby Supercubber95 » Mon Jun 20, 2011 3:19 pm

Nice! That would be a good pic. I have tried to scratch build some myself :x :evil: :x It never worked. Everything broke, and when I finished I almost threw it away. The last one I did turned out better thatn the last kit I did, but I said no more scratch built for a while. I admire your skills, Sir.
Who put an "S" in lisp? :P
Supercubber95
 
Posts: 218
Joined: Wed Apr 21, 2010 2:13 pm
Location: Belle Fourche, South Dakota

Postby scigs30 » Tue Jun 21, 2011 12:05 pm

I am waiting for my tissue to arrive and now I have the Comet Nieuport all done waiting for the tissue. Plane weighs 10 grams minus the wheels. The wheels weigh over 5 grams so I will replace them. As you can tell I pretty much built it per the plans and will cover with Easy Built tissue. I don't like using Esaki on these small planes. I think over the next day or so I will put my RC Nieuport together and get a picture of all 3 next to each other before covering.
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby Supercubber95 » Tue Jun 21, 2011 12:16 pm

It looks like it has a kid :wink: Nice work scigs.
Who put an "S" in lisp? :P
Supercubber95
 
Posts: 218
Joined: Wed Apr 21, 2010 2:13 pm
Location: Belle Fourche, South Dakota

Postby Pulsepilot » Tue Jun 21, 2011 9:28 pm

Beautiful work man 8) .
Current favorite airplane: P-40 warhawk, F-35 is close second
Pulsepilot
 
Posts: 25
Joined: Wed Mar 09, 2011 9:15 pm
Location: Greenville, South Carolina

Postby jensheydel » Tue Jun 21, 2011 11:07 pm

Father and son right??? LOL nice work

Cheers, Jens
jensheydel
 
Posts: 73
Joined: Mon Jun 06, 2011 7:57 am

Postby Squishyp38 » Wed Jun 22, 2011 8:18 am

Like father, like son!
lol
Nice work man!
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
 
Posts: 240
Joined: Sun Feb 27, 2011 8:08 pm
Location: Top Secret

Postby Squishyp38 » Wed Jun 22, 2011 8:18 am

I have to ask, where did you get the comet kit?
The P-38 is arguably the best... Forget that, it is THE BEST fighter of world war two, and is epically AWESOME!
Squishyp38
Squishyp38
 
Posts: 240
Joined: Sun Feb 27, 2011 8:08 pm
Location: Top Secret

Postby scigs30 » Wed Jun 22, 2011 8:44 am

A fellow flyer at the flying club gave me this kit.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby scigs30 » Fri Jun 24, 2011 9:41 pm

Here are all 3 of my Nieuports. Next, I will start covering them all.
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

PreviousNext

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 22 guests