Cessna 180 Group Build

Ask other modelers for a little help / knowledge ?

Re: Cessna 180 Group Build

Postby Phugoid » Tue Apr 30, 2013 12:20 pm

I
Last edited by Phugoid on Sat Apr 05, 2014 2:46 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby Marshdweller » Sun May 05, 2013 3:54 am

My next question - should I have used a mix of PVA and water, or pure PVA to 'dope' the tissue? Was it the water in my mix that probably warped the surfaces, or could that have happened anyway?
Marshdweller
 
Posts: 34
Joined: Wed Aug 15, 2012 3:23 am

Re: Cessna 180 Group Build

Postby Marshdweller » Thu May 16, 2013 2:30 pm

So, after all the re-covering etc., final assembly took place, only to find that I have somehow managed to put a gentle corkscrew into the fuselage :oops: :cry: :( :(

I think this one might fly straight into the bin, and work will proceed on the next model forthwith, just as soon as I've revamped my workspace.
Marshdweller
 
Posts: 34
Joined: Wed Aug 15, 2012 3:23 am

Re: Cessna 180 Group Build

Postby Phugoid » Thu May 16, 2013 4:50 pm

w
Last edited by Phugoid on Sat Apr 05, 2014 2:46 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby Marshdweller » Fri May 17, 2013 3:53 am

Further closer inspection has revealed the root of the problem (quite literally) as unequal dihedral in the wings, NOT a twisted fuselage. So, the careful addition of the support struts has corrected about 95% of the problem. I think a small shim might be needed in the stabliser to get things as close to perfect as I can manage, but it's looking a lot better than I first feared.
Marshdweller
 
Posts: 34
Joined: Wed Aug 15, 2012 3:23 am

Re: Cessna 180 Group Build

Postby Phugoid » Fri May 17, 2013 12:25 pm

A good result then, don't forget to post some pictures....

Andrew
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby Marshdweller » Fri May 24, 2013 12:01 pm

Here's the latest update:

Image

It's no work of art, that's for sure. However, I think I've learned a lot from this build, mostly through the problems into which I have blundered, but it has been fun so far.

At the moment, I have still got to install the windscreens and parts for the landing gear, install the motor and balance the model. Hopefully then it will be ready for test flights!
Marshdweller
 
Posts: 34
Joined: Wed Aug 15, 2012 3:23 am

Re: Cessna 180 Group Build

Postby Phugoid » Fri May 24, 2013 2:15 pm

w
Last edited by Phugoid on Sat Apr 05, 2014 2:47 am, edited 1 time in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby Marshdweller » Fri May 24, 2013 3:39 pm

I might even leave the undercarriage as it is, and if the clear windows prove a pain I'll just use tissue. My main aim is to get this to fly rather than produce a pretty plane. Once I know I can build them correctly, then I'll move on to the aesthetic stuff.

Tell you what though, this balsa modelling is addictive!!
Marshdweller
 
Posts: 34
Joined: Wed Aug 15, 2012 3:23 am

Re: Cessna 180 Group Build

Postby Phugoid » Wed Feb 26, 2014 2:14 pm

"Bump"

Thought it might be useful....
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby leonhsu » Wed Feb 26, 2014 2:56 pm

Phugoid wrote:This picture shows the template in place (note that I snapped the top off it so I could clamp it with pins –it was too tall before)



I know this thread is from a while ago, but I'm new to the forum (and new to building), so I don't quite get how this template works. I would have thought you put it underneath the end of the wing to make sure you have the angle right. What am I missing?
leonhsu
 
Posts: 7
Joined: Wed Feb 26, 2014 9:09 am

Re: Cessna 180 Group Build

Postby Phugoid » Wed Feb 26, 2014 4:10 pm

mj
Last edited by Phugoid on Sat Apr 05, 2014 2:46 am, edited 2 times in total.
Phugoid
 
Posts: 952
Joined: Wed Jan 20, 2010 8:17 am

Re: Cessna 180 Group Build

Postby leonhsu » Thu Feb 27, 2014 10:15 am

ah ... makes sense now. thank you. i have a follow up question, but not germaine to Cessna 180, so I'll start a new thread to ask ...
leonhsu
 
Posts: 7
Joined: Wed Feb 26, 2014 9:09 am

Re: Cessna 180 Group Build

Postby jhnwdwrd » Sat May 31, 2014 12:24 pm

What happened to all of the posts from Phugoid??? I'm in the process of building this plane and I wanted to see his nose block treatment and all the posts from him are gone. Just random goobaly goop
jhnwdwrd
 
Posts: 3
Joined: Wed Nov 14, 2012 8:42 pm

Previous

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 28 guests