Guillows Spirit of Saint Louis build

Ask other modelers for a little help / knowledge ?

Engine details

Postby cliffm » Fri Sep 17, 2010 7:05 pm

Like Flash52 says look up the plane on a web-site so you can see the actual details. When I built my pt-17 it has the same dilemna. I added some intake and exhaust plumbing and the plans had no detail for the center of the top wing. You will be able to add some realism that the kit does not feature. Putting these features on your model just makes it stand out from the run of the mill kits. Yes, some of the plastic parts are minimalistic at best so I handcarve and fabricate parts at will to get the results desired.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby ADW 123 » Fri Sep 17, 2010 8:38 pm

here is an update. i changed the color.
Image

Image

Image

Image

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby dbcisco » Fri Sep 17, 2010 11:00 pm

Looks better now with the lighter aluminum color. Nice job.
A bumblebee isn't supposed to fly but does.
My plane is supposed to fly but doesn't.
Balances out doesn't it : )
dbcisco
 
Posts: 209
Joined: Fri May 30, 2008 8:34 am
Location: Lansdale, PA

Postby ADW 123 » Sat Sep 18, 2010 8:32 am

its got a little fuz on the paint because i used pearlized siver. i usually just take my hand and rub it off.
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby cliffm » Sat Sep 18, 2010 7:05 pm

Paint looks like quite an improvement. I was going to say on the last post that the lump of clay included in your kit also works for filling those awkward spots and places that are hard to shape. It takes paint pretty good too. The prop spinner on my Aeronca is made from it,you just don't want to handle it after painting, it's a little fragile but it looks nice.
cliffm
 
Posts: 370
Joined: Fri Feb 27, 2009 11:08 am
Location: fairdale N D

Postby scigs30 » Sat Sep 18, 2010 7:35 pm

I built this kit when I was a kid for a Jumbo Scale contest and it flew pretty good. I think I shaved a little weight and I covered it was Peck Polymers Gray tissue. I may have to build another some day, maybe when they come out with a laser cut version.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby ADW 123 » Sat Sep 25, 2010 5:01 pm

so ive added been working on some badly needed touch ups. i used some caulk to fill in gaps and to make where parts meet together look like welds on like on the real plane. ive also gotten the wing strt caps mostly finished. i made the general shape out of balsa. then glued it down, then i took some clay to make it look smoother and to make it connect all the way.

Image

Image

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0843.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0844.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0846.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0847.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0848.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0849.jpg[img]

Image

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Sep 25, 2010 5:02 pm

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0843.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0844.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0846.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0847.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0848.jpg[img]

[/img]http://i936.photobucket.com/albums/ad203/swaggerwarnera/DSCN0849.jpg[img]
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Sep 25, 2010 5:05 pm

Image

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Sat Sep 25, 2010 5:07 pm

Image

Image

Image

Image
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Previous

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 25 guests