Guillows Bird Dog Build

Ask other modelers for a little help / knowledge ?

Guillows Bird Dog Build

Postby scigs30 » Mon May 03, 2010 3:00 pm

Well not really a build since the majority of construction is done. My camera was in the shop, so there are no build pictures. This was a straight forward build with no modifications other than moving the motor mount forward one former. This kit came with excellent quality 1/20th balsa. The average weight of the sheets was 8-9 lb balsa, not bad for Guillows. So far as shown with the prop, she weighs in at 12 grams. I will cover with the kit tissue and either paint it or leave it alone, have not decided yet. I don't know if I am keeping the wheels, they look small and are smaller than the wheels that are shown on the plans. This plane should fly real nice, fun fast build. I was going to build the Sterling Bird Dog, but that was a smaller bird with much more wood so I don't think it would fly on rubber.
Image
Image
Image
Image
Image
Image
Image
Image
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby CaliforniaDan » Mon May 03, 2010 4:12 pm

A very nice clean build, you do credit to the model. I am also building a Bird Dog at present and am curious if you do fly what type of motor (rubber length) and flight times you might get.
CaliforniaDan
 
Posts: 4
Joined: Thu Mar 11, 2010 1:04 pm
Location: California

Postby scigs30 » Mon May 03, 2010 4:20 pm

If I don't paint it, it could fly on 1/8 rubber 1 1/2 times distance between motor hook and peg. I think it would do over a minute no problem. If I paint it, then 3/16 rubber same length and should come close to a minute.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby jimbothehotdog » Tue May 04, 2010 6:11 pm

Very nice... you do have a great touch...

I am also working on a Bird Dog, but am having trouble with the windscreen... if you have a couple pics of the windscreen in progress could you post them?


Thanks,
JTHD
jimbothehotdog
 
Posts: 16
Joined: Tue Nov 17, 2009 2:55 pm

Postby jimbothehotdog » Tue May 04, 2010 6:13 pm

Very nice... you do have a great touch...

I am also working on a Bird Dog, but am having trouble with the windscreen... if you have a couple pics of the windscreen in progress could you post them?


Thanks,
JTHD
jimbothehotdog
 
Posts: 16
Joined: Tue Nov 17, 2009 2:55 pm

Birddog

Postby vloustalot » Wed May 05, 2010 9:33 am

I don't know if these pics will help you with the windscreen. I cut out the template on the plan and modified the paper template until it fit the plane. I then cut out some thin acetate. I put the acetate "windscreen" in a pill bottle that had about the same curve as the windscreen, filled it with water and microwaved it several times until the acetate took the desired curve. I glued it with Testor's canopy glue along the top, waited for it dry throughly and then glued it along the rest of the edges.

Works for me.
Vince
Image
Image
Image
Image
My planes don't crash; they just land hard
vloustalot
 
Posts: 7
Joined: Mon Dec 21, 2009 1:10 pm
Location: Carriere, MS 39426

Postby ADW 123 » Tue May 11, 2010 10:41 am

how do you get the balso to look so clean?
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby scigs30 » Tue May 11, 2010 11:49 am

For once, this kit came with excellent wood, but still I sand the sheets before building. I also sanded off some of the print so it does not show through the tissue. I use Elmers white glue all or Testors wood cement, that way everything looks nice and clean. A lot of glues dry brown or orange or stain the wood like CA's so I stay away from those glues.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby ADW 123 » Tue May 11, 2010 2:38 pm

but the white glue takes so much longer to dry, how do you hold it in place to make sure it dries correctly
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby scigs30 » Tue May 11, 2010 8:43 pm

Longer to dry than what? The first rule of any glue is a good tight fit. Any wood glue has to be doubled glued for a strong bond, but also a fast drying bond. You have seen how fast I build and most of my builds are with Elmers white glue all. If I am building a Guillows kit with the kit wood, I sometimes use Testors wood glue. The reason is because of the poor quality of the wood. I have never had an issue with dry times with white glue or strength issues. I have build large R/C birds and Estes rockets with white glue and once again no issues.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby ADW 123 » Wed May 12, 2010 5:36 am

so what you pin the parts down? how do you keep it in place so it will dry?
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Postby ADW 123 » Wed May 12, 2010 7:23 am

and wouldnt that take some time to wait for it to dry?
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Birddog build

Postby vloustalot » Wed May 12, 2010 9:03 am

I have been using Elmer's carpenter's glue. It is a yellow glue that dries clear. It dries pretty quickly; about 20 - 30 minute set time. I pin the structure to my building board until the glue dries, or I have a variety of clamps to hold the various pieces together until the glue sets.

I sometimes use CA, but, being a klutz and sometimes not checking for final fit of pieces before applying glue, I have been leaning to the carpenter's glue more and more. It gives me a second chance before everything is stuck together, and I am teaching my grandkids new words that their mothers don't like. Besides, there are many steps in building a model, and, usually, I can go to another step while one dries.

Vince
My planes don't crash; they just land hard
vloustalot
 
Posts: 7
Joined: Mon Dec 21, 2009 1:10 pm
Location: Carriere, MS 39426

Postby scigs30 » Wed May 12, 2010 12:18 pm

ADW, What type of parts are you talking about? Lets take a typical Guillows model. I pin the keels to the board. Put Elmers glue on the former, touch the former to were I want it and remove it, add more glue to the former and attach it back to the keel. It tack dries super fast so I don't have to hold it up. I continue with all my formers. The great thing about Elmers, it tack dries fast but takes awhile to cure completely. So if I find out that a former is crooked or does not line up with the center keel, then I can adjust it. This is why my builds are straight. Stringers: I pre bend the stringers so they are not causing stress on the fuselage. This prevents a crooked fuselage. I make my notches tight enough to hold the stringers so I don't have to use pins. If the notch opening is too big to hold the stringer, then I fill the void with wood shims. I add glue to the notch, set the stringer in place, and remove the stringer, Then add more glue to the notch and set the stringer in place. Once again it tack dries so fast I don't have to pin it in place. Any time you have to force a piece of wood into place by severe bending, you are taking a chance of a banana fuselage. I try to eliminate severe bending by pre forming my parts with steam or water. I use the same technique for Testros green tube wood glue.
scigs30
 
Posts: 844
Joined: Mon Nov 06, 2006 11:31 am

Postby ADW 123 » Wed May 12, 2010 12:25 pm

and do you think that after the model is built and covered and painted and stuff it will make the plane look better? also, just to clarify, you take the former, put it into place, put glue on it, then take it off, and put more glue on it or wait until the clue tacks a little....

do you soak your stringers in water for a while?
ADW 123
 
Posts: 1158
Joined: Mon Feb 22, 2010 5:22 pm
Location: Cincinnati, Ohio

Next

Return to General Building Questions

Who is online

Users browsing this forum: No registered users and 1 guest